Timber Frame Residential Granny Flats 6.6 m x 4.5 m

Description

Highly Insulated Residential Homes- Timber Frame Park Homes,- Residential Units-Granny Annex- And Much More!

Amazing Prices and Unbeatable Specification

Timber Frame Buildings by logcabins.lv

Please ask for details enquiries@logcabins.lv

Residential Timber Frame 2056

Cabin size - 6.6 m x 4.5 m (26.6 sq meters)
Decking - 4.0 m x 3.0 m
Overhang - 65 cm

Window size - 1x 150 cm x 113 cm
Window size - 1x 75 cm x 190 cm
Window size - 1x 75 cm x 113 cm
Window size - 1x 50 cm x 50 cm

Door size - 2x 80 cm x 193 cm (inside)
Door size - 1x 80 cm x 193 cm (inside, slide)
Door size - 1x 240 cm x 195 cm

Bedroom - 3.0 m x 2.7 m
Bathroom - 2.05 m x 1.2 m
Lounge - 3.0 m x 3.0 m
Utility - 0.85 m x 1.2 m

Ridge height - 2.47 m
Wall height - 2.0 m

Logcabins.lv, has over the years pushed the industry to offer higher quality build materials at lower prices. Greed in the industry has turned customers away from Quality Timber Frame solutions to cheap shed like structures.

Sadly also a lot of builders now manufacture their timber frame buildings on site, which in our opinion should be illegal.

All our segments (sectional sandwich panels) are manufactured inside our modern factory.

All our structural vertical timber is graded CLS KD PEFC CE C24, all internal horizontal bracing is CLS KD PEFC CE C18, we do not use C16 in any part of our segments or builds, to the layman these grades mean very little, but to the industry they are a high and a very expensive benchmark to reach! And this timber should remain dry, while the Timber Frame Panels are being manufactured. Our pricing is way below the industry standard and our quality way above.

Please do not hesitate to send us directly an email to ask about a timber frame solution for your needs.

Below is a typical Segment specification:

Exterior walls: segments consisting of wooden framework 45x145mm, impregnated gypsum plates as wind isolation, 20 mm air gap, horizontal spruce larch panels (undercoated), fully prepared holes for door installation.

in free lengths: 150 mm KNAUF insulation, 0.2 mm plastic film, lathing for the piping and cable gap 45x45 mm, 50 mm KNAUF insulation, 12.5 mm gypsum plate, 10 mm chipboards as additional materials in WC/showers.

Internal walls: segments consisting of framework 45x95;

in free lengths: 100 mm KNAUF insulation, 12.5 mm gypsum plate from both sides, also 10 mm chipboards as additional materials in WC/ showers.

The roof:precut rafters 45x195 + 45x95mm, c/c 600mm;

in free lengths: 12.5mm gypsum plate, 50mm KNAUF insulation, 45x45 lathing for cables extra insulation, 0,2mm plastic film, 250mm KNAUF insulation into the rafters, diffusion film, lathing for air gap 45x45mm, 22 mm chipboards and bituminous shingles as final roof cover.

Boards for covering outside joints of segments, wind boards and panel boards for covering the bottom outside of the roof in free lengths, all materials painted as outside panel.
Rain gutter system: made of coated steel.
Galvanized metal materials needed for segment assembling: bolts, anchoring bolts, metal plates.

Windows: Quality wooden laminated frame windows with triple glazed package, Scandinavian-type - opening outside, with quality handles painted in chosen colour. Doors: simple wooden entrance doors with insulated plate (glass package window can be included) with 3-plug locks and handles, impregnated, grunted and painted white. Wooden inside doors made glued pinewood with impregnated MDF fillings, with simple locks grunted and painted white.